当前位置:首页> PRODUCTS

HDMI extender 100m

    HDMI Extender  over 100m Single UTP cable 4K@30hz,HDMI 1.4,HDCP 1.4,3D
    Model No : CA-506A

    详细说明


    1.0 Introduction

    The 4K 100M HDMI extender uses one single Cat5e/6(recommended)cable instead of HDMI cable,you can extend the 4K signal to 100 Meters.The purpose of the extender is to achieve long-distance signale transmission with low- cost wires.

     

    2.0 Features

    1) Support HDMI1.4v;

    2) Signal transmission :CAT5e or CAT6(recommended) cables up to 100 meters instead of HDMI cables are connected between           TX and RX Extender;

    3) Support input/Output Resolution :

    4Kx2K@30Hz/1080p/1080i/720p/576p/576i/480p/480i;    

    4) Support CEC;

    5) Audio format support :

       DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD;

    6) No loss of quality;

    7) Installs in minutes;

    8) Need DC5V/1A power supply.

     

    3.0 Packaging Accessories

    When first unpacking your extender please check to see if the following items are included:

    1.HDMI Transmitter -------------------1PCS

    2.HDMI Receiver ----------------------1PCS

    3.Power supply-------------------------2PCS

    4.User manual--------------------------1PCS

    4.0  Specification


    Length of CAT-6 cable between Transmitter and Receiver----------------------------------------Up to100 meters

    HDMI Input/Output---------------------------------------------------4Kx2K/1080p/1080i/720p/576p/576i/480p/480i

    Support audio format ------------------------------------DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

    Max bandwidth-----------------------------------------------------------------------------------------------------------340MHz

    Max baud rate---------------------------------------------------------------------------------------------------------10.2Gbps

    Input Video signal -------------------------------------------------------------------------------------------0.5~1.5Volts p-p

    Output DDC signal-----------------------------------------------------------------------------------------5Volts p-p (TT1L)

    Input/Output HDMI cable distance-------------------------------------------≤15m AWG26 HDMI standard cable

    Max working current----------------------------------------------------------------------------------------------------800mA

    Power adapter format ------------------------------------Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A

    Operating Temperature range------------------------------------------------------------------------------ (-15 to +55℃)

    Operating Humidity range------------------------------------------------------------5 to 90%RH (No Condensation)

    Dimension(L x W x H)------------------------------------------------------------------------------------82x43.5x23.5mm

     

    5.0 Panel Descriptions

    Please study the panel drawings below and become familiar with the signal

    input(S),output(S)and power requirements.

     

    Transmitter Panel 

    Status --------------------------Power/HDMI Status indicator

    HDMI Source ----------------------------------HDMI Input port

    DC/5V--------------------------------------DC Power Input Port

    1080p/4K--------------------------------------Resolution switch

    Cat5e/6 -----------------------------Network cable output port

     

    Receiver Panel

     

    Status -------------------------Power/HDMI Status indicator

    HDMI LCD ----------------------------------HDMI Output port

    DC/5V-------------------------------------DC Power Input Port

    Cat5e/6 ------------------------------Network cable input port

     

    6.0 Connect and Operate

    Application

    (Point to point application)

     

    6.01 Connect source device with transmitter by one HDMI cable(Max=15M).

    6.02 Connect display device with receiver by one HDMI cable(Max=15M).

    6.03 Connect TX with RX by one cat5e/6(Max=100M).

    6.04 Connect the power supply to the TX and RX.

    6.05 LED indicator:When a signal is input to work,steady blue light.

     

    7.0 Installation and precautions

    To avoid electric shock , product damage and to protect your safety , please notice the following:

    1. Please slowly plug or unplug signal cables and do not often plug , unplug , or shake them.

    2. The equipment should not be placed under the sun , rain and damp or  unventilated environment.

    3. Liquid items should not be placed on the equipment.

    4. Do not install the equipment near heat sources such as fire , power , or other amplifiers that produce heat.

    5. Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.

    6. Do not demolish the equipment by yourself ; it should be maintained by professional maintenance staff.


    下一条: HDMI extender 60m